“Industry itself needs to be saved” – Joep van Lieshout

"Industry itself needs to be saved" - Joep van Lieshout

Dutch designer and artist Joep van Lieshout talks to Dezeen about his sculptures depicting cannibalism and suicide in this interview recorded at the Carpenter’s Workshop Gallery in London, and how “industry itself needs to be saved” so he plans to “start producing from scratch again” (+ audio).

Above: Gastronomy, 2011

In the interview recorded at the opening of the exhibition (listen above), he describes the pieces in the collection titled New Tribal Labyrinth that envisage returning to a more primitive industrial society.

"Industry itself needs to be saved" - Joep van Lieshout

Above: Blastfurnace, 2012

The largest sculpture is titled Blastfurnace and depicts industrial elements once used in the steel manufacturing process as part of a shelving unit.

"Industry itself needs to be saved" - Joep van Lieshout

Above: Blastfurnace, 2012

Van Lieshout explains how he is planning to build a blast furnace so he can produce his own steel to make into furniture, which he admits will be “extremely expensive”.

"Industry itself needs to be saved" - Joep van Lieshout

Above: Gastronomy, 2011

“Objects and products became so cheap, it’s not a challenge anymore,” he says. “People start to look for more special things, things with a soul.”

"Industry itself needs to be saved" - Joep van Lieshout

Above: Friends, 2011

Van Lieshout is currently working on a large “human-powered saw mill”, propelled by up to 16 people running on treadmills.

"Industry itself needs to be saved" - Joep van Lieshout

Above: Joep van Lieshout at Carpenter’s Workshop Gallery

Take a look at our previous story about his sculptures here and see all our stories about Atelier van Lieshout here.

The post “Industry itself needs to be saved”
– Joep van Lieshout
appeared first on Dezeen.

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Rotterdam-based design studio Atelier Van Lieshout will present new sculptures in bronze at Carpenters Workshop Gallery in London this autumn.

Blastfurnace by Atelier Van Lieshout

Above: Blastfurnace, 2012

Three pieces from the New Tribal Labyrinth body of work, entitled Blastfurnace, Gastronomy and Friends, will be shown alongside Atelier Van Lieshout’s first work in bronze from back in 2007, the Technocrat table.

Blastfurnace by Atelier Van Lieshout

Above: Blastfurnace, 2012

The Blastfurnace exhibition will be open from 11 October to 21 December.

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Gastronomy, 2012

We’ve featured a number of pieces by Atelier Van Lieshout on Dezeen, including an indestructible mobile dwelling and an oil drum sculpture in Rotterdam.

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Gastronomy, 2012

See all our stories about Atelier Van Lieshout »
See all our stories about Carpenters Workshop Gallery »

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Gastronomy, 2012

Here’s some more information from the gallery:


Atelier Van Lieshout
Blastfurnace
11 October – 21 December 2012
Opening Thursday 11 October 6-9pm

Blastfurnace celebrates Atelier Van Lieshout’s relationship with Carpenters Workshop Gallery, inaugurated six years ago with an exhibition of AVL’s first works in bronze, the Technocrat bronze Table (2007-2011). Blastfurnace unites this piece with major recent works in bronze from AVL’s latest series, the New Tribal Labyrinth. The three sculptures: Blastfurnace (2012), Gastronomy (2012) and Friends (2011) explore different aspects of life as proposed in the New Tribal Labyrinth, itself a celebration of equilibrium.

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Friends, 2011

Atelier Van Lieshout was found in 1995 as a multidisciplinary platform by artist Joep Van Lieshout. Atelier Van Lieshout investigates material, process and form through alternative methods. Unconventionally established as a self-sufficient, living artwork, AVL has declared its independence from the port of Rotterdam, within which it is located. The artworks created here breed new forms and pose questions on the world we live in and we do so; human nature, ethics, industry and art.

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Friends, 2011

Through experimentation, AVL creates sculpture that varies from the organic to the industrial, as diverse and extreme as a Mobile and exhibitions educating children about recycling. Ranging from large-scale dwelling structures to human organ sculptures, both are combined in the 2004 piece Wombhouse, AVL blurs the boundaries between fantasy and function, fertility and destruction. This provocative approach dissects both the human body and systems of society.

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Friends, 2011

Each project can be interpreted in myriad ways; when a body of work ends, another one begins. Slave-City (2005-2009) is a monumental project, creating and exploring an alternative, ecological financial structure and social system that aims to reduce our carbon footprint. The project was followed by the New Tribal Labyrinth series, another proposal for the survival of the planet. Here, Joep Van Lisehout creates a new hybrid culture, a society inhabited by tribes based on the industrial and agricultural structures that are diminishing within today’s society. He advocates a reintroduction of balance between labour and materials, reasserting, within our collective consciousness, that the value of goods and products is inextricably linked to human labour.

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Technocrat, 2007

Inspired by the Arts & Crafts movement, AVL refutes the society of the disposable; an object connects its end use to the sculptor who made with his own hands. Ritual will be re-valued in the New Tribal Labyrinth, playing a crucial role in this new proposed society. In the near future, these elements will participate in the emergence of various new cultures. Groups of people will begin to organize themselves by tribe rather than nationality. AVL creates objects, installations and equipment through which they can connect with one another: monuments to be worshipped, cannibalistic sacrificial equipment, daily objects and designs. He reintroduces a sense of respect to the things we use and live with.

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Technocrat, 2007

The sculptures exhibited in Blastfurnace project the New Tribal Labyrinth scenarios from the mind of Josep Van Lieshout. Where Slave-City focused on the recycling of bodies, New Tribal Labyrinth hones in on making sustainable, “keepable”, lifelong objects that offer knowledge to human beings and to human living. New models of behaviour, and new systems for an alternative world are proposed, advocating simplicity, grace and tolerance to share health and prosperity, with respect to the ecosystem. Farming, industry and ritual form the three main facets of this huge work in progress – a “Gesamtkunstwerk” (total work of art).

Blastfurnace at Carpenters Workshop Gallery by Atelier Van Lieshout

Above: Technocrat, 2007

New Tribal Labyrinth reinterprets the logic of an economy and ecology based on industrial efficiency in an attempt to bring back materiality as a principle of civilization. Critically analysing today’s world, Atelier Van Lieshout’s work proposes a revolution on the contemporary and provides practical proposals for living, taken from ancient of living.

The post Blastfurnace at Carpenters Workshop Gallery
by Atelier Van Lieshout
appeared first on Dezeen.

Shading by Robert Stadler at Carpenters Workshop Gallery

Shading by Robert Stadler at Carpenters Workshop Gallery

London Design Festival 2011: Austrian designer Robert Stadler presents new work at Carpenters Workshop Gallery in London.

Shading by Robert Stadler at Carpenters Workshop Gallery

Called Shading, the collection includes Lightspot (above), with plates of aluminium in graduated colours framing the light thrown on a wall.

Shading by Robert Stadler at Carpenters Workshop Gallery

The slabs of Possible Low Table #2 are stacked in a staggered formation and Stadler also presents new pieces in his Royèroid series that we featured last summer.

Shading by Robert Stadler at Carpenters Workshop Gallery

Shading is on show at 3 Albemarle Street, London W1S 4HE until 12 November.

Shading by Robert Stadler at Carpenters Workshop Gallery

See all our stories about Robert Stadler here and all our stories about Carpenters Workshop Gallery here.

Shading by Robert Stadler at Carpenters Workshop Gallery

The gallery will present new work by Nendo next month  – see our story about it here.

Shading by Robert Stadler at Carpenters Workshop Gallery

The information below is from Carpenters Workshop Gallery:

 


 

Robert Stadler returns for his second solo show at Carpenters Workshop Gallery, exploring the notion of ‘Shading’ throughout the featured artworks created for this occasion. Stadler continues to challenge the viewer to question the established ideals of traditional design, by paying homage to Jean Royere, and by examining the possibility that lies between the perception of the artifact and its conceptual interpretation through his innovative collections.

Shading by Robert Stadler at Carpenters Workshop Gallery

The Royèroid series reflects reverence to Jean Royère’s classic furniture design “Ours Polaire”. In his “Ours Polaire” series Royère sought to unify the various elements of a seat in order to form an abstract whole. This method has produced furniture with a sculptural quality. In creating the Royèroid series, Stadler continues on Royere’s ‘quest for abstraction’ up to a point in which the object turns monolithical, appearing as if it was a three-dimensional computer mesh, whilst maintaining an entirely handmade creation.

Shading by Robert Stadler at Carpenters Workshop Gallery

The technically complex work utilizes a combination of traditional artisanal furniture craftsmanship with cutting edge technology. The result is a striking reinterpretation on Royere’s classic design. When comparing both series we find a shared taste for the use of materials, as well as a strong emphasis on traditional craftsmanship. Yet in Royèroid unattended colour associations produce a new perception of the re-interpreted shape. In this case the shading process is metaphorical.

Shading by Robert Stadler at Carpenters Workshop Gallery

In the artists’ words: “The details of the whole are flattened as if a skin had been stretched around the previously separate elements. Diamond-shaped areas in different colours correspond to the front armrests and the seat cushion of the original. They appear as ghostly reflections of areas which, in Royère, required seams or the creation of separate elements. The fabric used for the ‘Royèroids’ has also been selected with reference to the ‘Ours Polaire’ series for which Royère used a hairy and very soft textile. It is much more flush than the original, with a suede-like touch which has the same magnetic attraction on its user.”

Shading by Robert Stadler at Carpenters Workshop Gallery

When looking at Lightspot, the varying shades of light projected outwards seem to materialize, shaping into superimposed layers of aluminium plates attached to the wall. The colour gradation of the plates diffuses in the same way as the light does when hitting the wall, thus granting the piece with a three dimensional effect.

Shading by Robert Stadler at Carpenters Workshop Gallery
Stadler pushes the boundaries of design further in Possible Low Table #2 by exploring the perception of balanced versus unbalanced in both nature and objects. In this way new forms are created. The table achieves balance through the strategic placement of staggered pieces, thereby questions the designer’s role of producing the perfect object. At first glance the piece of furniture appears to be an unlikely pile of random pieces, but on closer examination it is precisely designed considering correct stability and ergonomic use. It seems as if the table has been solidified while going through its shaping process in order to form a possible whole. Each piece is perfectly placed and carefully considered. Every layer can be seen as the shadow of the one above, and when looking at it from different perspectives the object takes on a new shape.

Shading by Robert Stadler at Carpenters Workshop Gallery

“I enjoy revealing the strange sides to an object and making people love them. We easily reject the bizarre as it seems established that functional objects should be simple, self-explanatory, attractive etc. So I try to add a different dimension to my works, but without neglecting these rational parameters.” – Robert Stadler

Shading by Robert Stadler at Carpenters Workshop Gallery

Shading
12 September – 12 November
3 Albemarle Street,
London W1S 4HE


See also:

.

Royèroid by
Robert Stadler
Corso Place Franz Liszt
by Robert Stadler
Robert Stadler at
Galerie Emmanuel Perrotin

Scatter Shelf by Nendo

Scatter Shelf by Nendo

Japanese designers Nendo will present this display unit with shelves that are only 5mm thick at Carpenters Workshop Gallery in London next month. Watch the movie on Dezeen Screen.

Scatter Shelf by Nendo

The Scatter Shelf is made of glossy acrylic sheets, arranged in a grid formation from the front but a staggered configuration from the side.

Scatter Shelf by Nendo

The glossy surface slices up reflections when viewed from an angle and scatters them in all directions.

Scatter Shelf by Nendo

The piece will also be on show at Friedman Benda in New York from 10 November.

Scatter Shelf by Nendo

See all our stories about Nendo here.

Scatter Shelf by Nendo

Photographs are by Masayuki Hayashi.

Scatter Shelf by Nendo

Here are some more details from Nendo:


Nendo will show a new piece “scatter shelf” at Carpenters Workshop Gallery in London during the Frieze Art Fair, and Friedman Benda in NY from November 10th.

The scatter shelf is composed of 5mm black acrylic shelves in a grid form, stacked in three layers and slightly displaced. The resulting shelving unit is not only structurally strong but creates a visual effect in which objects placed on the shelves appear as though caught in a spider’s web when viewed from the front.

Scatter Shelf by Nendo

When viewed on an angle, the glossy acrylic face creates a series of reflections within the shelves, making the ‘opaque’ acrylic appear to be transparent.

Scatter Shelf by Nendo

The diffused reflections caused by the ‘surfaces’ shine and form also separates and scatters the view behind the shelving unit, creating a completely kaleidoscopic effect.


See also:

.

Thin Black Lines by
Nendo
International Triennale of Kogei by Nendo24 ISSEY MIYAKE Shop
by Nendo

Flat Surgery by Mathieu Lehanneur

More from French designer Mathieu Lehanneur: this time a series of rugs depicting squashed vital organs. (more…)

Gallery assistant internship at Carpenters Workshop Gallery


Dezeenjobs:
Carpenters Workshop Gallery in London are looking for a gallery-assistant intern:

Gallery Assistant Internship

The Carpenters Workshop Gallery specialises in bringing artistic positioning to design, through an ambitious program of exhibits they avoid categorisation by uniting conceptual and functional works which strive to challenge and enlighten.

The gallery presents established artists such as Marc Quinn, Atelier van Lieshout, Wendell Castle, Ingrid Donat and extends to the current generation; Sebastian Brajkovic, rAndom International, Robert Stadler, Pablo Reinoso, Demakersvan, Xavier Lust, Vincent Dubourg and Mathieu Lehanneur.

Based in Mayfair, 3 Albemarle Street, we aim to be the destination in London for cutting-edge contemporary design-art.

Internship duties:

  • Gallery administration
  • Dealing with enquiries from clients, galleries, curators, press, museums, auction houses, gallery visitors and the general public
  • Assisting with curatorial research for forthcoming exhibitions
  • Designing press releases, catalogues and associated visuals
  • Event planning, private views, exhibitions, photo shoots
  • Providing assistance to the press officer, gallery manager, director, curator and Partners
  • Liaising with artists and designers

Flexible with working hours; some Saturday work may be necessary. Full time preferable, part time, 2 days a week minimum.

Technical knowledge required – Microsoft Office, Excel, InDesign, Photoshop is useful but not crucial.

Good writing skills and the ability to communicate clearly and concisely are an essential part of the job.

Excellent multi-tasking skills – every day is different.

This internship is an excellent opportunity for anyone who wishes to learn how an art/design gallery operates.  It is hands on and requires focused candidates who have a desire to learn, a professional outlook and are passionate about art and design.

Please email your CV and a covering letter stating why you think you are a good candidate to:

James Malcolm Green, Gallery Manager James@cwgdesign.com

T 020 3051 5939

www.carpentersworkshopgallery.com

Please mention that you saw this position on Dezeenjobs

150-colour-dezeen-jobs-450.jpg

Browse more jobs on Dezeenjobs

Join our mailing list for regular job updates or subscribe to the Dezeenjobs feed or follow us on Twitter

A weekly jobs update is published on www.dezeen.com every Monday.

Are you recruiting? Dezeen is read by over a million architects and designers around the world every month.

Submit a job advertInfo and ratesContact us