Dezeen archive: scaly design

dezeen archive scaly design

Dezeen archive: to welcome in the Chinese year of the snake we’ve compiled an archive full of scaly architecture and design. See all our stories about scaly design »

See all our archive stories »

The post Dezeen archive:
scaly design
appeared first on Dezeen.

Gingerbread House by Laura Dewe Mathews

Rounded shingles create wooden scales across the walls of this small house in Hackney that architect Laura Dewe Mathews has built for herself (+ slideshow).

Gingerbread House by Laura Dewe Matthews

Nicknamed the Gingerbread House by neighbours, the two-storey house sits behind the reconstructed wall of a former Victorian box factory and its tall windows overlap the mismatched brickwork.

Gingerbread House by Laura Dewe Matthews

“I and the planners were keen to retain something of the original building envelope,” Laura Dewe Mathews told Dezeen. “The pale grey/blue bricks were part of the workshop when I bought it and the clean London stock bricks were infills.”

Gingerbread House by Laura Dewe Matthews

The architect drew inspiration from decorative vernacular architecture in Russia to design the cedar-shingle facade, then added windows framed by thick galvanised steel surrounds.

Gingerbread House by Laura Dewe Matthews

“I was keen that the cladding somehow softened the sharp silhouette of the overall, stylised building form and thought the round ‘fancy butts’ might achieve this,” she said. “Contemporary architecture can often be perceived to be severe and alienating and I wanted to avoid that. I hope the balance of the sharp galvanised steel window reveals and cills versus the round singles manages to be more friendly.”

Gingerbread House by Laura Dewe Matthews

To avoid overlooking neighbouring houses, all windows had to be placed on the north-facing street elevation, so Dewe Mathews also added a large skylight to bring in natural light from above.

Gingerbread House by Laura Dewe Matthews

A double-height kitchen and dining room sits below this skylight on one side of the house and opens out to a small patio. The adjoining two-storey structure contains a living room on the ground floor, plus a bedroom, bathroom and small study upstairs.

Gingerbread House by Laura Dewe Matthews

Walls and ceilings are lined with timber panels, while a resin floor runs throughout the house.

Gingerbread House by Laura Dewe Matthews

The building was the winner of the AJ Small Projects Awards 2013. Also nominated was a wooden folly that cantilevers across a garden lake and a reed-covered tower that functions as a camera obscura.

Gingerbread House by Laura Dewe Matthews

Scale-like facades have featured in a few buildings over the last year, including a university building in Melbourne and an apartment block in alpine Slovenia.

Gingerbread House by Laura Dewe Matthews

Photography is by Chloe Dewe Mathews.

Gingerbread House by Laura Dewe Matthews

Above: the original site

Here’s a project description from Laura Dewe Mathews:


Box House / “Gingerbread House”

This is the first new build project by Laura Dewe Mathews. The motivation for the project was to create a domestic set of spaces with generous proportions and lots of natural light while working with a limited budget.

Gingerbread House by Laura Dewe Matthews

Above: ground floor plan – click above for larger image

The site was originally part of the garden of an early Victorian end of terrace house in Hackney. It was first built on in the 1880s, to provide Mr Alfred Chinn (the then resident of the end of terrace house) with space for his box factory, making wooden boxes for perfume and jewellery.

Gingerbread House by Laura Dewe Matthews

Above: first floor plan – click above for larger image

In discovering the history of the site, Laura Dewe Mathews was drawn to assemble yet another box inside the original envelope of the factory.

Gingerbread House by Laura Dewe Matthews

Above: cross section through kitchen and dining room

The one bed, new-build house was recently completed using a cross-laminated timber super structure, placed inside the existing perimeter brickwork walls and rising up out of them. The timber structure has been left exposed internally. Externally the palette of materials is limited to the original and infill brickwork, round “fancy-butt” western red cedar shingles and galvanised steel flashings, window frames and window reveals. The soft shape of the shingles contrasting with the crisp edges of the galvanized steel.

Gingerbread House by Laura Dewe Matthews

Above: cross section through living room and bedroom

The form of the proposal was a response to tricky site constraints, common for urban developments in already built up areas. The neighbours’ rights to sunlight, daylight and privacy needed to be respected. Consequently the only elevation that could have any windows was the north facing, pavement fronted elevation. The proposal counters this with large south facing roof-lights; added to this, light is brought into the main living spaces via a new private yard.

Gingerbread House by Laura Dewe Matthews

Above: front elevation

At 80msq the result is a small yet generously proportioned house. At ground floor level it retains the openness of the original workshop while feeling a sense of separation from the street immediately adjacent.

Gingerbread House by Laura Dewe Matthews

Above: side elevations

Structural engineer: Tall Engineers
Main contractor: J & C Meadows, now incorporated within IMS Building Solutions

Gingerbread House by Laura Dewe Matthews

Above: rear elevation

Sub contractor/suppliers:
KLH – cross laminated timber super structure
Stratum – resin flooring
Vincent timber – cedar shingle supplier
The Rooflight Company – roof light supplier
Roy Middleton – bespoke joinery including kitchen
MPM engineering – stainless steel to kitchen

The post Gingerbread House
by Laura Dewe Mathews
appeared first on Dezeen.

Home Accessories from CES

Seven new products to enhance home living

While most of our CES coverage has gone to the latest tech advancements for your wrist or camera, we’ve also set aside an assortment of our favorite accessories for improving life at home. From heated toilet seats with retractable bidet spouts to energy saving outlets, the following are seven home product highlights from the 2012 CES.

mohzy.jpg

For many Americans, the lawn is a highly visible extension of one’s personality. Mohzy’s Petal solar lights blend into the surrounding nature with a pop of clean design. The little green fixtures recharge daily, going on automatically at dusk and deactivating at dawn. The Petal light comes in two sizes and will be available in the coming months.

fitbit-scale-1.jpg Swash-2.jpg

Fitbit’s Aria smart scale allows you to accurately track your weight, body fat percentage and BMI. Small electrodes in the surface glass send safe signals through the body to precisely measure your body’s fat and lean mass. Aria also uses wi-fi, so users can track their progress online, or with the iPhone app, with graphs and tools to help reach their goals. Pre-order is now available from Fitbit for $130.

Another bathroom accessory that caught our eye was the Swash, an “advanced bidet seat” to add a bit of luxury to your throne. The eco-friendly Swash features a heated seat, automatic lid, retractable bidet with heated water and customizable settings. And yes, it also has a dryer option. The Swash sells for between $180-$600.

sonamba-1.jpg modlet-2.jpg

Disguised as a digital photo frame, the Sonamba is a well-being status monitor and communication center for senior citizens. The touch-screen device offers medication reminders in easy-to-read text with email options and a personalized emergency response system. Plus, it actually shuffles through digital photos when not in use. The Sonamba is available for $550 with a monthly data plan for web-based access.

To cut down on the massive amounts of energy wasted by unused appliances left plugged in, Modlet automatically shuts on and off on schedule and wirelessly sends status reports to your computer to help monitor appliance efficiency. Modlet starts at $50 for the home model and includes software for graphing and tracking your energy use.

tv-and-miniwiz.jpg

As the most intriguing design piece of the lot, Leon Speakers’ Trithon Reyn TVblends old-world aesthetics with the latest television technology. Accented wtih genuine python skin, the rich walnut, steel and brass tripod TV makes a strong statement standing more than eight feet tall.

For a considerably lighter-hearted home accessory, the Solarbulb turns discarded water bottles into renewable lights. The solar-powered bulb screws onto most bottles to offer a fixed level of LED light. The curious little light fixture is not yet available, but should be expected in the months to come.