If there ever was a major leap in the evolution of the 3D printer, the voxeljet Concept is the benchmark machine to follow. In the explosive arena of start-ups that produce innovative 3D-printers, voxeljet has decided to challenge and change the direction of how 3D printers work. Taking a look at three specific factors that set this process apart from others on the market, it becomes quite clear just how revolutionary this concept is.
- The ability to have a continuous supply of consumables delivered to the machines as it is making a model. This is made possible because the bed of consumables sits above where the models are actually made.
- The printhead sits in an area that it tilted at about a 35 degree angle with a printhead resolution of 600 DPI.
- The build size 800mm x 500mm x Infinity. As the model is being printed it sits on a conveyor belt that delivers the model out at the other end.
At a layer thickness of 150 to 400 microns, the resolution is decent when compared to others 3D printers but it is worth noting that this is still in the concept phase so there is the possibility to improve the layer thickness.
Continuous 3D-Printing Technology represents a new dimension in the manufacturing of moulds and models without tools. With its big advantages compared to conventional standard-3D-printers VX concept is a pioneer for a whole new generation of machines. The length of the moulds is virtually unlimited with this type of system as there is no restriction to the length of the belt conveyor. The usable build length is only limited by the manageability of the moulds. Furthermore, the tilt of the print level enables the print head to take far less time for positioning movements, which improves the print speed. Apart from the technological highlights, users will be pleased with the investment and operating costs because they are lower than those of conventional systems. With the continuous printing system, there is no need for a build container or separate unpacking station, which has a positive effect on the purchase costs. The printer also scores points with its high re-use rate for the unprinted particle material, which is returned straight to the build zone from the unpacking area. Consequently, the machine requires smaller filling quantities and incurs lower set-up costs.
Check the promo vid after the jump…
Post a Comment