Photographing the kids’ artwork is a great way to keep from having to save everything junior creates in a physical form. Photographs save the memories without sacrificing storage space. Digital images are easy to organize, but getting decent shots of the kids’ work can be difficult. Creating a DIY lightbox can be a cheap, inexpensive solution for getting great, memorable shots.
A couple of years ago, I suggested a few strategies for organizing your kids’ artwork. Once you’ve picked out your favorites, it’s nice to frame them for a home gallery or to create an album, like those from Shutterfly or Apple.
But like I mentioned earlier, taking a good photo of Jr.’s art project isn’t always easy. Lighting and a “noisy” background can be troublesome. Fortunately, the solution is simple, effective, and inexpensive. The following instructions are how I made a simple light box out of materials I (mostly) already had at home.
What is a light box?
A light box, as I’m describing it, is a box that’s open on one end and has light-diffusing material on the sides and top, that lets you take nearly shadow-free photographs of objects. Professional photographers use them to get gorgeous product shots. You can use them for a variety of items. Here’s what you’ll need:
- A large-ish cardboard box
- White tissue paper
- Tape
- A box cutter
- At least two light sources
- White poster board
- A ruler
Building your light box
To get started, cut the flaps off of the box’s top and then place it on its side. Next, use a ruler to mark one inch from the edge on the side of the box. Then use a strait edge to mark off lines one inch away from the edge. Use the box cutter to cut out that inner square section of cardboard. (You’re making the sides look like three cardboard picture frames attached to the bottom and one side of the box. See the image above.) Repeat that process on two other sides, leaving the bottom intact.
Next, add your light-diffusing material: tissue paper. Cut a sheet of plain white tissue paper so that it’ll cover the three sides of the box that you cut. Tape it into place. Now for the poster board.
This part is a little bit tricky. Cut a piece of poster board that’s as wide as the opening to your box but twice as long. Slide it into the box and up the back so that it’s touching the top. Make sure not to crease the poster board. If you do, that crease will really show up in your photos. The idea is to make an “infinite” background of white.
Test it out
That’s it! The box has been constructed. Now you need two light sources. I’m using two tabletop gooseneck lamps. Position one on each side, aimed directly at the tissue paper. Finally, put your camera on a tripod, stack of books, table, or whatever will keep it still. Finally, position your subject and shoot.
You’ll have to play around a bit to see if you need more tissue paper, to re-position the camera and so on. But really, you’ll see great results right away. When you’re done, upload the photos to your favorite service, do what you want with the digital image, and enjoy your great-looking archive of the kids’ beautiful art.
Additional tips: Above, I photographed a little clay sculpture. If you’re doing something flat like a painting, carefully remove the top piece of tissue paper and shoot down. Also, you can add more light buy putting another source pointing into the box from the top.
This whole project cost me less than twenty dollars (I bought two lamps) and I’m thrilled with the results. Also, if you’re not the DIY type, you can buy a premade lightbox for around $40.
Let Unclutterer help you get your home or office organized. Subscribe to our helpful product shipments from Quarterly today.
Post a Comment