The Boathouse by Alex Cochrane Architects

London-based studio Alex Cochrane Architects added a timber balcony and an open-plan interior to this Victorian boathouse in a deer park in the south of England.

The Boathouse by Alex Cochrane Architects

Overlooking a lake in Great Windsor Park, Berkshire, the boathouse was once the royal boat keeper’s lodgings but now operates as a writer’s retreat.

The Boathouse by Alex Cochrane Architects

Alex Cochrane Architects stripped out the interior of the building but retained its A-frame timber beams, which had to be sandblasted due to damage from nesting birds.

The Boathouse by Alex Cochrane Architects

Large casement windows have been added to the southwest elevation, while folding doors open onto the new balcony. Roundel windows also allow light to reach the exposed roof structure.

The Boathouse by Alex Cochrane Architects

“We wanted to open up the two gable elevations to daylight and views without changing too greatly the historical appearance of the boathouse and its internal timber structure,” Cochrane told Dezeen.

The Boathouse by Alex Cochrane Architects

“We also wanted to include a cantilevered balcony that would ‘float’ over the lake, and in doing so had to tie back a series of steel beams to the original framework positioned in the centre of the boathouse,” he added. “This was a complicated exercise given the fragility of the existing structure.”

The Boathouse by Alex Cochrane Architects

The entrance to the boathouse leads into the kitchen and living area, which also contains a built-in sofa and desk under the window.

The Boathouse by Alex Cochrane Architects

The shower, toilet and dressing areas are placed in the centre of building and divided by sliding doors and mirrors, while the bedroom at the far end leads to the balcony overlooking the lake.

The Boathouse by Alex Cochrane Architects

A low-level joinery unit runs the length of the building, serving as a bookshelf and reclined seating, with a dressing table incorporated at the bedroom end.

The Boathouse by Alex Cochrane Architects

Oak veneer panels have been used throughout the interior, including the kitchen units and bed as well as the walls and doors of the bathroom.

The Boathouse by Alex Cochrane Architects

A ground source heat pump from the lake supplies the heating coils beneath the Douglas fir floorboards.

The Boathouse by Alex Cochrane Architects

We recently reported on Alex Cochrane Architects’ redesign of the menswear department of Selfridges in London.

The Boathouse by Alex Cochrane Architects

We’ve also featured a boathouse in Norway with folding flaps in its facade and another in Texas with a waterfall cascading from its upper storey.

The Boathouse by Alex Cochrane Architects

See all our stories about boathouses »
See all our stories about British houses »

Here’s some more information from the architects:


Alex Cochrane Architects were offered the opportunity to design and oversee the comprehensive restoration and remodelling of a Victorian Boathouse overlooking the lake of Virginia Water in Windsor Great Park, Berkshire.

The top floor of The Boathouse, once the Royal Boat Keeper’s lodgings, now serves as a spectacular all-inclusive retreat taking advantage of one of the most outstanding settings of the south east of England. The ground floor maintains its purpose of housing boats with two large timber doors opening outwards onto the lake.

The Boathouse by Alex Cochrane Architects

Proposal:

It seemed appropriate that The Boathouse, an independent but redundant structure, set in isolation on the banks of a lake and surrounded by unparalleled natural beauty, should be revived as an ultimate place of refuge, inspiration and reflection away from the demands of city life.

ACA proposed a number of extensive changes to the structure. These included the substantial opening up of the two end elevations with new and larger windows, the addition of a new timber balcony that would ‘float’ directly over the lake and the complete stripping out of an obsolete interior for a contemporary open plan arrangement of three interlocking ‘living’ zones. In addition, we were able to deliver an environmentally sustainable approach towards the heating of The Boathouse.

The Boathouse by Alex Cochrane Architects

Architecture / Main works:

The interior fabric was completely stripped out revealing a surprisingly sound A-frame structure that until then had been hidden from view. Years of neglect and nesting birds had nevertheless taken their toll requiring the A-frames to be sandblasted exposing the true warmth and texture of the wood. These repetitive structures now serve as key historical and functional elements of the design.

The two white painted timber boarded end elevations were extensively opened up to allow light to penetrate the darkest areas of the Boathouse while ensuring a more transparent relationship between the interior and its natural setting. Larger period style casement windows were added on the southwest elevation and new period style folding doors now open wide onto the new cantilevered balcony.

Roundel windows were added at both end elevations providing for further light at ridge level while celebrating the newly exposed roof structure and elevated heights.

Altering of the external appearance had to be very measured. Surprisingly the structure was not listed, but any unsympathetic alterations to its original form would risk reversing years of history, royal associations and familiarity for those using the park. Any contemporary design solutions would be reserved for The Boathouse interior.

The Boathouse by Alex Cochrane Architects

All the casement windows, doors and their respective frames were replaced along the long elevations due to rot and worm. A conservationist approach was adopted for any existing element that needed replacing in order to maintain the period appearance of the Boathouse within its natural setting.

The floor structure was far from level and inadequate to support the proposed interior elements and the cantilevered structure supporting the balcony so there was little alternative but to replace the joists in their entirety with new ones.

There was no local supply of gas but Virginia Water Lake presented itself as a fine opportunity to provide constant heat throughout the year by way of a ground source heat pump. The Crown Estate were in full support for this ecological approach of laying 300m of ground loops 2m deep on the lake bed. The heat generated from the lake would supply the under floor heating coils beneath solid timber flooring.

Additionally, the removal of all the internal linings allowed for high levels of insulation to wrap around the perimeter walls, roof structure and between the floor joists increasing the sustainability credentials of the refurbishment.

The Boathouse by Alex Cochrane Architects

Fit-out / Arrangement:

The interior is divided into three open zones providing the essential means that one might wish for in everyday life such as sleeping, reading, bathing, resting, working and eating.

A multi purpose low-level joinery unit runs the full length of The Boathouse connecting these three zones. This joinery unit predominantly serves as a library while two upholstered reclining benches are advantageously integrated below the windowsills and a vanity desk is incorporated at bedroom end of The Boathouse.

Upon entering The Boathouse one arrives in the cooking, eating, writing and seating area. This zone remains open plan with a degree of flexibility allowing the various activities to take their course. A large low-level table provides a central location where these activities can merge.

The Boathouse by Alex Cochrane Architects

The middle zone is further divided into a series of interlocking but ultimately separate spaces including the shower, changing, loo and vanity areas. The design allows for a dynamic relationship between all four parts while addressing the conflicting attributes of privacy and transparency in the form of concealed sliding doors and mirrors.

The third zone is the resting and sleeping area where a large bed lies at the center, looking out over the cantilevered balcony and onto the lake. When the folding glass doors are open, one absorbs the unsurpassed views of Virginia Water and Windsor Great Park. It is here that the romanticism of The Boathouse interior and its relationship within its natural setting is most profound.

The Boathouse by Alex Cochrane Architects

Materials:

The Boathouse design was very much material led. Contemporary design solutions were incorporated within the project and building process but traditional and natural materials were preferred. The goal was to offer a warmer atmosphere that might be expected in a retreat of a former age. It was also essential that the pallet of materials remained restrained to underline the clarity and simplicity of the interior elements and the spaces.

Straight-grained oak veneered panels were generally the material of choice with full-size honed Carrara marble slabs introduced in the shower area as well as for the kitchen and vanity surfaces. Dinesen Douglas floorboards were chosen due to their solidity, long lengths, wide widths and a livelier grain that would be the perfect complementary material against the more uniformed grain of the oak joinery units.

The Boathouse by Alex Cochrane Architects

In keeping with the minimalist aesthetic, honed Basalt hearths provided an earthy colour and depth to two fireplaces that are otherwise without any decorative detail. Mirrors line the tall cupboard doors and sliding vanity panel serving a practical purpose as their reflections playfully confuse the arrangements of certain parts of the interior. Great attention was given to even the smallest of components. Bespoke solutions were provided for door handles, lighting, switches and even the toilet flush.

Very fine detailing and precision in the fabrication process were key in defining the purity and quiet sophistication of the interior elements. In order to achieve such an acute level of precision, the joinery and fabricated elements were constructed in workshops and later assembled on site.

Furniture & Lighting:

Nearly all the furniture is bespoke and integral to the design of The Boathouse interior. Two chaise long sofas come together to form a large bed, the reclining seats below the windowsills appear to be carved out of the bookshelf unit, the main seating area returns to form a writing desk and a very large low level table serves a number of functions: it can be an eating or entertaining surface or a platform for books and objects.

A number of free-standing chairs inhabit the interior including Gio Ponti’s Super Leggera, Norman Cherner’s plywood chairs and the Hans Wagner CH25 all preferred for their pared down aesthetic.
Erco track lighting provides directive light from high level, cage lights with bronze bulb holders are suspended above the low-level joinery table and a gold plated Ball Light by Michael Anastassiades hovers above the changing area bench.

Objects and Art:

In line with a less-is-more approach and where emptiness is actually celebrated, the selection of artwork has been purposely limited. A seascape photograph entitled Hurricane by Clifford Ross is appropriately positioned above the bed and facing the lake while William Peers’ sculptures from his 100 Days and Flow series inhabit parts of The Boathouse.

All accessories have been chosen to serve a practical purpose whether it be Andrew Bird’s log baskets from Great Yarmouth, Liam O’Neill turned wood bowls from Co. Galway or Fiamma Montagu’s ceramic tableware and vases.

Project Team, Suppliers and Contributors
Client: Galewest Investments
Architects: Alex Cochrane Architects, London
Project Management: Clinton Cowley for Galewest Investments, Berkshire
Main Contractor: Robert’s Building Company, Surrey
Joinery: John Baulkwill for Opus Magnum, London
Stonework: David Jones for Verona Marble, Kingston
Floorer: Peter Moyces for Cavendish Floors, Chiswick
Sculptures: William Peers, Devon
Ceramics / Tableware: Fiamma Montagu, Oxfordshire
Tatami mats: Wabi Sabi, West Sussex
Freestanding Furniture: Supplied by Aram, London.
Lighting: Ball Light by Michael Anastassiades, Sigmar, London Filament lighting and accessories, Urban Cottage Industries Track lighting, Erco, London

The post The Boathouse
by Alex Cochrane Architects
appeared first on Dezeen.

Selfridges Men’s Designer Space by Alex Cochrane

Selfridges Mens Designer Space by Alex Cochrane Architects

A geometric sculpture grows from a column and branches across the ceiling of the new designer menswear space designed by architect Alex Cochrane for London department store Selfridges.

Selfridges Mens Designer Space by Alex Cochrane Architects

“We wanted to challenge the way items of clothes, products and accessories are displayed,” Cochrane told Dezeen during a tour of the space before it was opened.

Selfridges Mens Designer Space by Alex Cochrane Architects

Manequins are lined up like soldiers at the end of each row of brass clothing rails and selected garments hang on brass rods that slide in and out of a mirrored wall where required.

Selfridges Mens Designer Space by Alex Cochrane Architects

The angular plinths used for displaying accessories are clad with the same material as the floor tiles, a rare light-grey Bleu de Savoie marble that comes from a single quarry in France.

Selfridges Mens Designer Space by Alex Cochrane Architects

The fitting rooms are lined with zig-zagging mirrors and bright blue fabric, providing a contrast to the simple palette in the main space,

Selfridges Mens Designer Space by Alex Cochrane Architects

The project is on the first floor of the department store, which is also currently hosting a pop-up concept store for Louis Vuitton designed by Yayoi Kusama.

Selfridges Mens Designer Space by Alex Cochrane Architects

Photos are by Andrew Meredith.

Here is some more information from Alex Cochrane:


From the start we worked with Selfridges to challenge the conventional approaches towards retail design, luxury and display. We pushed the boat out but they encouraged us to do so. We shared a creative understanding and a confidence that allowed us to investigate and then build a series of unique display elements. We developed these elements to be dynamic in their form, execution and materiality so as to welcome and inspire the visitor. In essence, our approach was sculpture park meets retail.

Selfridges Mens Designer Space by Alex Cochrane Architects

The Men’s Designer Display Elements

The hanging rails greatly influenced our approach in designing the Men’s Designer area. It was essential that the rails showcased the international brands in the best possible light. We preferred an ordered and repetitive layout of fixed rails that would define a legible retail environment and a coherent customer experience. The solid brass rails with a patinated bronze finish are all of one size and are positioned in pairs along the perimeter walkways and either side of the three stone plinths. The gaps between the rails allow the customer to freely view the merchandise or cross the floor without obstruction.

They create a form of buffer zone between the central aisle and the high traffic walkways that surround the mat. This is advantageous, as the Men’s Designer area is very much exposed to its surroundings. This buffer zone ensures that the aisle remains a haven where the customer can quietly view the brands in their entirety without the distractions that often accompany large retail environments.

Selfridges Mens Designer Space by Alex Cochrane Architects

The Stone Plinth

Selfridges shared our view that some merchandise would be better presented on slanted surfaces. We designed three monumental stone plinths that would be placed in succession down the middle of the central aisle of the Men’s Designer area. They appear to be solid blocks of stone that have been sculpted back to allow for a varying amount of flat and slanted surfaces. The hexagonal cut corners, which match the shapes of the stone floor, only heighten the sculptural qualities of the plinths.

Their gravitas ensures that that they are not just viewed as display units but also as permanent architectural components integral with the shop floor. A light grey marble was chosen for its consistent veining and colouring. This stone also worked well against the large white and grey veined the hexagonal floor slabs. Very fine detailing and precision in the fabrication and cutting process were key in defining the purity and solidity of the objects. The plinths include storage drawers but they remain discreet to the eye. A glass display unit is incorporated in the central plinth housing the smaller accessories.

Selfridges Mens Designer Space by Alex Cochrane Architects

Feature Wall

It was always our intention that the rear of the Men’s Designer floor should include a dramatic display element that would activate what was until recently an uneventful part of the floor. The large mirror-polished wall contains 700 solid brass rods that are free to slide in and out at varying lengths to hold merchandise. Depending on the brand objectives, this feature wall can generate numerous display and three-dimensional relief formations increasing the playful dynamics of the retail environment.

The mirror-polished stainless steel reflects and distorts the environment and like the canopy structure provides a point of focus for the customer to view from afar. The design of the wall was very much inspired by the Pinscreen toy patented by Ward Fleming in the 1980s.

Selfridges Mens Designer Space by Alex Cochrane Architects

Canopy Structure

The canopy structure originally stemmed from Selfridges’ desire for a pop-up shop within the Men’s Designer area. This pop-up shop would frame a location where a brand could be showcased in a more theatrical light.

We initially proposed a modest size structure that countered the repetitive order of the rails, flooring and the traditional coved ceiling. The structure took on an organic and random form. But as the project developed the structure just kept on growing, spreading out along the underside of the coffers and beyond the limits of the space and over the walkways eventually becoming an unmissable point of interest within the central atrium. We welcomed this expansion as it helped to define the Men’s Designer floor area within the larger context of the central atrium and the numerous brands that occupy it.

We developed the sculpture through a series of models including a 1-to-1 prototype. We paid particular attention to its fluidity so that it would serve as a directional tool inviting the customer off the walkways and onto the shop floor. The sculpture is theatrical with its tree-like form, but we opted for a white finish to match the coffered ceiling. We preferred to maintain a level of subtlety in order that all the varying elements worked together rather than against each other.

Selfridges Mens Designer Space by Alex Cochrane Architects

The Fitting Rooms

The Fitting Room Area offers the customer a very different experience from that on the shop floor. To enter the Fitting Rooms one first encounters a lobby space of faceted mirrors that pull you into a lowly lit corridor. The fabric-lined walls, soft lighting, relaxed seating and unique fixtures allow the customer to quietly and calmly consider the merchandise away from the movement and sounds of the main floor.

The post Selfridges Men’s Designer Space
by Alex Cochrane
appeared first on Dezeen.