Dec 18

Studio 3.0 adds dual extensions to 1970s Octagon house in Cape Cod

Posted in: Uncategorized
Octagon house in Cape Cod

Boston architecture studio Studio 3.0 has added a wedge-shaped extension and a screened-in porch to an octagon-shaped house in Cape Cod originally built in the 1970s, keeping the addition distinct from the original core.

Located in Truro, Massachusetts, the Octagon: Revisited project followed the owner’s desire for more space for a growing family while retaining the original structure of a house built in 1974.

Octagon house in Cape Cod
Studio 3.0 has added a wedge-shaped addition to a 1970s octagon house in Cape Cod

“Importantly, the Octagon itself has enormous sentimentality for the family, so it was imperative that it stay intact and that the addition – a new bedroom, bathroom, and office space – be a truly independent extension of the existing home,” said Studio 3.0 principal Josh Slater.

The project encompasses two extensions – both of which branch off opposite sides of the house – and updates and reconfiguration of the original 780-square-foot (72-square-metre) octagon core.

Octagon house in Cape Cod
An extension and screened-in porch branches off opposite sides of the original structure

Its design centres around the client’s desire to keep the addition noticeably distinct from the original house while playing off its structure, which was difficult to add directly on to, according to Slater.

“Lifted into the tree canopy by a minimal concrete foundation, the entire structure is essentially eight wood trusses that hang off a single 6″ (15 centimetres) HSS metal post in the centre,” he said.

Octagon house in Cape Cod
Yellow was used to highlight exterior structural elements

The solution was to create two cantilevered “wedges” that jut outwards from the octagon’s perimeter and are supported by metal columns. One contains an enclosed residential space and the other is a smaller, screened-in porch.

The porch aspect juts directly from the face of the octagonal house, while the residential extension was rotated 22 degrees to “assert itself as a distinct volume”.

Another rectangular volume was sandwiched between the house and the residential extension. This volume holds a new staircase for the house, which doubles as a gallery for the owner’s art.

“The stair tower between is a simple vertical volume to further separate – figuratively and literally – the new from the existing,” said Slater.

On the volume’s interior, the designer left a slice of the original column exposed.

Octagon house in Cape Cod
The original interior was reconfigured as part of the project

“I very intentionally set the location of the stair, and that side of the stair wall, just an inch back from that column face. I wanted to express that as its own piece of ‘art’ within the stair volume, and as another nod to the connection to the existing home,” said Slater.

The enclosed addition holds a new bedroom, office and bathroom, while the original structure holds one bedroom, two bathrooms, a kitchen and a living area.

Octagon house in Cape Cod
An original column was left exposed in a new stairwell

To reflect the vernacular architecture of Cape Cod, the entire house was clad in accoya wood, a “more sustainably sourced” version of the common weathered cedar siding found in the area, with vertical siding used on the original house and horizontal on the extension.

Additionally, some elements on the exterior were marked with a “playful and joyful” yellow. Slater noted the colour was chosen during the 2020 pandemic when the team wanted something to make them smile.

Octagon house in Cape Cod
The addition contains a new bedroom, office and bathroom

“The ‘question’, so to speak, in my mind was how do you engage with such a distinctive existing condition, rather than avoiding addressing it – but it was critical to do something that is responsive without being too literal,” said Slater.

“The addition should be in dialogue with the existing building.”

Elsewhere in Cape Cod, a campaign was launched to save Marcel Breuer’s holiday home from demolition, while Dezeen recently rounded up the top 10 house extensions of 2024.

The photography is by Gregg Shupe

Project credits:

General contractor: Lemanski Construction
Structural engineer: Siegel Structural Engineers

The post Studio 3.0 adds dual extensions to 1970s Octagon house in Cape Cod appeared first on Dezeen.

No Comments
Dec 18

Dreame Expand Its Smart Cleaning Ecosystem at CES 2025: Introducing Outdoor Cleaning Robots, Water Purifiers, and Advanced Hair Care Products

Posted in: Uncategorized

With CES 2025 just around the corner, Dreame is gearing up to showcase its latest smart home cleaning solutions advancements. The company’s theme for this year, “All Dreams In One Dreame,” highlights its mission to blend futuristic technology with practical solutions for modern living.

Designer: Dreame

Dreame’s plans include unveiling an expanded product lineup that pushes into new territories, including outdoor cleaning devices such as pool cleaning robots, window cleaning robots, air purifiers, and water purifiers. As a self-proclaimed geek when it comes to robotic pool cleaners, I’m ecstatic: I can’t wait to see what Dreame will dream up in this category. There’s something genuinely exciting about how these devices combine cutting-edge engineering with practical convenience, turning a mundane chore into an effortless experience.

Dreame Roboticmower A1

I’m excited to see how Dreame will innovate in this category has me eager to explore how they’ll enhance functionality and design in outdoor cleaning. These additions complement the brand’s established indoor offerings, which include robot vacuums, wet and dry vacuums, and hair care tools. Together, they create an integrated ecosystem that aims to simplify everyday tasks while advancing the smart home concept.

Building Momentum: Dreame’s Achievements in 2024

The groundwork for Dreame’s CES 2025 showcase was laid with a stellar performance in 2024. At CES and IFA last year, the company introduced several innovations that reinforced its leadership in the smart cleaning industry. Among these were remarkable products like the DreameBot X30 Ultra, featuring 8,300Pa Vormax suction, MopExtend RoboSwing Technology for navigating tight spaces, and advanced self-cleaning capabilities. Additionally, the DreameBot L20 Ultra, Dreame H13 Pro Wet and Dry Vacuum, and Dreame Z10 Station Cordless Vacuum Cleaner captured the attention of industry experts and consumers.

DreameBot X30 Ultra

The IFA 2024 debut of the L40 Ultra Robot Vacuum further showcased Dreame’s focus on cutting-edge technology. Equipped with 11,000Pa suction power, SideReach technology for better corner cleaning, and a built-in voice assistant, this vacuum set a new standard for hands-free operation. Dreame also teased concept features like the Pro Leap System for climbing obstacles and Versalift Navigation for cleaning under furniture, pointing to the exciting possibilities for future products.

What Drives Dreame’s Success?

Since its founding in 2017, Dreame has focused on combining high-speed digital motors, smart algorithms, and advanced motion control to deliver top-tier cleaning solutions. This focus on technological innovation has enabled the company to expand its reach to over 100 countries and serve more than 21 million households. By creating products that require minimal intervention while maximizing efficiency, Dreame has established itself as a global leader in the smart cleaning industry.

Dreame’s product ecosystem is another key factor in its success. From robot vacuums to hair care devices, the company’s offerings are designed to work together seamlessly, providing a cohesive experience for consumers. Features like AI-powered navigation, app-based customization, and intelligent obstacle avoidance enhance usability and deliver personalized cleaning experiences.

Looking Ahead

As Dreame prepares to take the stage at CES 2025, it’s clear the company is not resting on its laurels. CES has long been a platform for showcasing groundbreaking advancements, and Dreame’s presence this year is set to emphasize its innovative contributions to the smart cleaning industry. With an expanded product lineup and a sharp focus on designing for everyday life, Dreame is set to make smart home living in 2025 more intuitive and accessible than ever.

Visitors to Dreame’s booth, spanning an impressive 3,498 square feet, will find an interactive setup designed to engage and inform. Dedicated zones will feature live demonstrations of smart cleaning, outdoor innovations, and hair care technologies. A unique addition to this year’s exhibit is a hands-on hair-styling area where attendees can try Dreame’s hair care devices. This experiential approach shows the company’s effort to connect its technology with real-world applications.

For those attending the event, the Dreame booth at the Venetian Expo, Halls A-D, booth 52632, promises an inspiring glimpse into what’s next for this forward-thinking brand.

The post Dreame Expand Its Smart Cleaning Ecosystem at CES 2025: Introducing Outdoor Cleaning Robots, Water Purifiers, and Advanced Hair Care Products first appeared on Yanko Design.

No Comments
Dec 18

Volcanic landscape informs Hacker Architects design of Oregon lodge

Posted in: Uncategorized
Hacker Black Butte Lodge

Portland-based studio Hacker Architects has replaced an outdated lodge with a blackened wood-and-glass structure featuring elements informed by the volcanic landscape of Sisters, Oregon.

Black Butte Ranch was planned and constructed in the early 1970s, and sits on 1,800-acre parcel of land at the base of The Three Sisters peaks in Oregon’s Central Cascade mountains.

Hacker blackened cedar lodge with mountain in the background
Hacker Architects has created a lodge in the mountains of Oregon

Now home to year-round residents and vacationers, the ranch embarked on a redevelopment plan in 2013 that included a recreation and dining complex and general store, completed by Hacker in 2016 and 2021, respectively.

Then, the development team turned its attention to the lodge constructed by Portland architect Bing Sheldon in 1969 with landscape design by Doug Macy, founder of Walker Macy Landscape Architecture.

Woman walking in snow towards lodge
It replaced a structure from the 1970s and is one of several structures created by Hacker Architects on the site

Due to accessibility issues, ageing mechanical systems and an outdated layout, the Hacker team opted to replace the lodge – using input from a year-long community outreach process – rather than renovate it.

“The original lodge was designed at a time when geometric complexity was in, with lots of floor levels, nooks and crannies, lofts, and a large sheltering roof. Strangely, the interior didn’t really create strong connections to the incredible views around the site,” Hacker principal Corey Martin told Dezeen.

“We wanted the experience of the new lodge to evoke memories of the original while connecting people to the site in more meaningful ways.”

Clerestory window in lodge
Hacker Architects used a massing informed by the local topography

Hacker applied its signature “Landform Building approach”, which sets the structure as subordinate to the landscape and draws references from the regional agricultural buildings, connecting the design to both site and place.

“[Black Butte Ranch] aims to honor and evolve the design language of the original ranch buildings and is intended to elevate the experience of the surrounding landscape through the careful framing and layering of views and a sensitive interpretation of regional materials and forms,” said the studio.

Massive stone fireplace in lodge
Volcanic-stone elements feature on the interior

Hacker considered the high-elevation desert climate of Central Oregon, with characteristic columnar basalt, underground lava tubes and thunderegg formations that result from the volcanic landscape, to inform the fractured and displaced form of the lodge.

The form and pitch of the roof match the slope of nearby Black Butte, while clerestory windows bring light into the space from all directions. The oblique walls create a series of rising and falling profiles, both inside and outside the lodge.

Bar area in Black Butte Lodge
Blackened wood features on the exterior and interior

The exterior is clad in cedar charred in Japanese fashion, which maintains the weathered look of the original lodge while increasing durability and referencing the region’s wildfires. Natural-toned wood soffits contract the dark exterior and floor-to-ceiling glazing accesses as much sunlight as the climate affords.

The building – now twice the size of the original lodge – is divided into three public sections.

CNC cut door
The door was created using a CNC machine

A double-height stone fireplace serves as the focal point for the bar and restaurant, which feature booths that are carved out of the wall like lava-formed pools and tables created from a large ponderosa pine tree from the site.

The southeastern portion of the plan holds an event area with a large multi-use space that can be partitioned out and leads to an outdoor terrace. Upstairs, a floor lounge, bar and terrace space overlook the ground floor.

The back-of-house spaces and state-of-the-art kitchen are located on the north side of the plan, forming a triangle that can serve each of the public areas.

Using wood salvaged from the original lodge as guard rails, screens, furniture and wall finishes, “the interior celebrates the ranch tradition of highlighting wood through its exposed structure and finishes”.

Contrasting wood tones further the sense of “warmth and openness”.

Hacker Black Butte Lodge
It has plentiful glass to open up to the landscape

As a special touch, Martin CNC-ed the entry doors to depict lava flowing from below the mountains and other scenes from the landscape.

Recently, Hacker revamped a 60-year-old athletic centre at a school, constructed by Lewis Crutcher Architects, in Portland, wrapping it in stained cedar. The studio also overhauled a 1970s Brutalist library by George Rickrise and Donald Richardson in Salem, Oregon.

The photography is by Jeremy Bittermann.

Project credits:

Architecture and interior design: Hacker
Hacker design team: Corey Martin, Nick Hodges, Scott Mannhard, Brendan Hart, John Dalit, Jake Freauff, Matthew Sugarbaker, Charles Dorn, Jennie Fowler, Mayumi Nakazato
Contractor: Kirby Nagelhout
Landscape: Walker Macy Landscape Architecture
Kitchen designer: Bargreen Ellingson Restaurant Supply and Design
Civil engineer: Harper Houf Peterson Righellis Inc. (HHPR)
Structural engineer: Madden & Baughman Engineering
Mechanical & plumbing engineer: PAE Consulting Engineers
Electrical engineer: PAE Consulting Engineers
Lighting: Luma Lighting Design
Acoustical engineer: Listen Acoustics
Client: Black Butte Ranch

The post Volcanic landscape informs Hacker Architects design of Oregon lodge appeared first on Dezeen.

No Comments
Dec 18

LEGO Group starts building Innovation Campus in Denmark

Posted in: Uncategorized

When I was younger, one of my dream workplaces is LEGO as I imagined it would be such a cool place to work in. All that creativity from their pieces probably come from creative people of course and their work environment would also probably be conducive for all that innovation. In two years time, we’ll see that unfold in their future workplace, although I would probably be too old to actually work there.

Designer: LEGO Group

The LEGO Group has now broken ground for their Innovation Campus, the new home for their global workplace that will be a model for creativity and sustainability. The 50,000 square meter campus will house various LEGO departments including product marketing and development, gaming, product and quality teams and will include the 600+ designers that they and will have. It will also house the largest library of LEGO elements, including 20,000 different elements in 70 different colours.

As expected from such a company as LEGO, this campus will house six overlapping modules with up to four floors. This will feature not just work spaces but also play zones, atriums, and a PlayWay that will go through all the “neighbourhoods” within the campus. There are also a lot of green spaces and the structure itself will be made from sustainable FSC certified timber. They will also be meeting standards by enhancing the structure and space’s energy efficiency, materials, biodiversity, and water conservation.

They actually involved their employees who will be working there in the design process. They used, of course, LEGO bricks to give their input in the design process, inspiring creativity and idea-building the LEGO way. The Innovation Campus is located in Billund, Denmark and is expected to be finished by 2027.

The post LEGO Group starts building Innovation Campus in Denmark first appeared on Yanko Design.

No Comments
Dec 18

A$ap Rocky’s Galaxy design collection features “retro-futuristic” pieces

Posted in: Uncategorized

It’s a given fact that a lot of musicians are pretty stylish. Sure they have their actual stylists and designers or their style may not be to everyone’s taste but they sure know how to rock a dress or design their apartment. So it’s no surprise that a lot of these celebrities have their own fashion line. Some have even gone so far as to come up with a lifestyle brand all their own.

Designer: Homemade (A$ap Rocky)

A$ap Rocky first launched his creative design studio in 2022 and for this year’s Design Miami, he unveiled his Galaxy collection which is described as a “deeper look into what a surreal retro-futuristic lifestyle would look like from the POV of a Satellite.” This retro-futuristic collection was created in collaboration with Italian manufacturer Gufram who was also their partner in their previous design collaboration.

The centerpiece of this collection is the CBNT.V1, a speaker cabinet that has massive speakers and some retro elements like vintage controls, VHS and cassette tape imagery but with supposedly futuristic elements. There’s also cushions with skyscraper imagery and a projector lamp that looks like a satellite. There’s also a 300 cm x 300 cm carpet that has three-dimensional New York City high rise buildings on it.

Even though it’s described as retro-futuristic, there isn’t much futuristic about it although retro is pretty much present. But in case this design aesthetic is your thing, you can already purchase any of the items by emailing them as there is no website to purchase these items.

The post A$ap Rocky’s Galaxy design collection features “retro-futuristic” pieces first appeared on Yanko Design.

No Comments
Dec 18

Multi-functional wireless mouse receiver solves one of its biggest pain point

Posted in: Uncategorized

As convenient as Bluetooth technology might be, there are still some hard limitations that make it a little less appealing. It’s notorious for latency and instability due to interference, and a Bluetooth device can only pair to at most three other devices at the same time. That said, Bluetooth offers the convenience of not having to rely on dongles, and the technology continues to evolve, at least for Bluetooth audio.

Bluetooth mice, on the other hand, seem to still be stuck in the past, which is why there’s still an ongoing tug-of-war between Bluetooth and wireless radio technologies. While the latter offers more consistency and flexibility, it comes at the cost of a USB port that is sadly becoming an endangered species on the laptops that need them the most. Fortunately, a simple yet genius redesign of the humble wireless mouse receiver could very well change the game, offering a solution that is years in the making.

Designer: Sanwa Supply

A wireless receiver is like a device that’s permanently paired to a wireless mouse, making it possible to use it on any number of devices that support a USB connection and a mouse. The design of these dongles is pretty minimal and bare, but they still take up the space of one USB slot, which means there’s one less port to use for other equally important peripherals. With today’s USB technology, however, that shouldn’t be the case anymore.

It doesn’t have an inspiring or even memorable name, but the Sanwa Direct 400-MAWBT209BK wireless mouse offers an interesting solution to this years-old problem. Instead of a simple stick or small block, the receiver takes the form of a multi-port USB-C hub with an HDMI port and a USB-C port. The latter practically reclaims that lost connection while the former adds functionality that the laptop may not offer at all, considering how some have completely ditched large ports like HDMI and USB-A.

It’s not a panacea, though, as it does require that the original USB-C port already possess related features like high-speed data connection and video out. That said, most laptops today do have at least one of these, so that’s not really much of a guessing game. There are other caveats, like how using the USB-C extension port on the receiver at full power could actually interfere with the wireless signal to the mouse. On the flip side, the receiver can function like a normal multi-port hub this way even when you’re not using the mouse.

Interestingly enough, the Sanwa Direct 400-MAWBT209BK wireless mouse also supports Bluetooth mode for those times when even a receiver is no good. This could be useful for tablets where sticking a USB hub can be inconvenient or inelegant. At least it offers users the choice of which technology to use at the right time, while still leaving the door, or a port rather, open.

The post Multi-functional wireless mouse receiver solves one of its biggest pain point first appeared on Yanko Design.

No Comments
Dec 18

Best Old-School Design Solutions Spotted in 2024

Posted in: Uncategorized

Everyone’s talking about the future, AI, blah blah blah. But this year we saw plenty of cool design solutions from earlier decades and centuries.

Early mass production: In ancient China they developed Dragon Kilns, which run up hills. The fires at the bottom send heat throughout the entirety of the structure, enabling mass firings.

In Japan, these Inuyarai bamboo slats protect businesses from dog pee and rain splatter.

An old-school construction trick, used everywhere from the Swiss Alps to Japan, is using rocks to hold roofing in place.

Farmers in Scandinavia have a low-tech way to make it easier for a horse and cart to reach the second story of a barn.

Residents of rural Eastern Europe built these Vâltoare, a natural washing machine made by tapping into rivers.

Here’s a 19th-century British design for a multi-tool.

Around the same time, the Shakers were building these retractable drying racks for their laundry facilities.

Doctors of the era, meanwhile, examined patients on one of these. Hopefully it was padded at some point.

Moving into the 20th century, we find this clever design for a no-tools-required-to-install hanging hook. The design persists today.

Architect Fabrizio Batoni designed these Art Deco faucets by reaching into manufacturer Mamoli’s back catalog, circa 1938.

Industrial designer Bruno Munari designed this Cubo, a modernist ashtray, around 1954.

Image: Di Albertozanardo – CC BY-SA 4.0

Arne Jacobsen’s Cylinda ashtray is another carcinogenic classic, circa late ’50s/early ’60s.

Legendary Italian industrial designer Enzo Mari designed his Formosa and Timor perpetual calendars in the 1960s. They’re still in production.

Spanish industrial designer Rafael Marquina designed his classic no-drip oil cruet in 1961. It too is still in production.

While this might look like an ashtray, it’s actually for storing jewelry. It’s part of a 1970s line of ceramic objects by Italian industrial designer Robert Grigato.

This Wildo Fold-A-Cup, a classic Swedish design, first went into production in 1979. It’s still on the market (with a slight materials update).

Here’s to hoping we encounter more objects in 2025 that have withstood the test of time.

No Comments
Dec 18

SSD stool by Tiptoe

Posted in: Uncategorized
SSD stool by Tiptoe

Dezeen Showroom: French furniture brand Tiptoe has added to its SSD seating collection with the launch of the solid wood SSD stool, available in a palette of contemporary colours.

The SSD stool continues the language of the SSD chair, which is characterised by its perfectly circular, slim seat and clean and welcoming, modern lines.

SSD stool by Tiptoe
The SSD stool comes in a range of colours

However, in place of a metal frame, it boasts legs made from solid FSC-certified wood, with a round footrest made of metal on the tallest bar stool version of the product harking back to the original design.

The stool’s robust and angled legs give excellent stability, according to Tiptoe, while the selection of five different coloured finishes reflects the results of in-depth colour research.

SSD stool by Tiptoe
A tall bar stool version is also available

Available from 20 February 2025, the SSD stool comes in three different heights and is suitable for use in a diversity of environments.

It is manufactured in Latvia and shipped flat-packed, in keeping with Tiptoe’s commitments to quality craftsmanship and sustainability.

Product details:

Product: SSD stool
Brand: Tiptoe
Contact: press@tiptoe.fr

Material: wood
Colours/finishes: Natural Oak, Graphite Black, Brioche Yellow, Grey Blue and Tangerine Red
Dimensions: 450, 650 or 750 millimetres

Dezeen Showroom

Dezeen Showroom offers an affordable space for brands to launch new products and showcase their designers and projects to Dezeen’s huge global audience. For more details email showroom@dezeen.com.

Dezeen Showroom is an example of partnership content on Dezeen. Find out more about partnership content here.

The post SSD stool by Tiptoe appeared first on Dezeen.

No Comments
Dec 18

Mushroom-like lamp uses indirect lighting like the moon to create a softer glow

Posted in: Uncategorized

In the darkness of the night away from distracting city lights, the moon shines as the brightest object in the heavens. You might think it’s giving off its own light, but it is simply reflecting the harsh and blinding light of the sun, diffusing it into something gentler and more calming. Thus, the moon has become a source of inspiration not only in literature but also in design.

Although it looks nothing like the moon, except perhaps when viewed top-down, this lamp design concept similarly takes a page out of Mother Nature’s book. Rather than use a shade to diffuse the lamp’s bright light, it uses that same principle of indirect lighting using nothing more than its own structure to bounce the light again and again to create a more serene atmosphere that’s perfect for your bedroom.

Designer: Danil Repko

There are many ways to weaken the strength of light, and most lamps use the common method of wrapping some material around the light source, either to let only a small portion of the light shine through or direct the light in a specific direction only. Another strategy is to have the light shine away from the viewer and only let the reflected light out, pretty much like how the moon is reflecting the sun’s light.

Appropriately named “Lunar,” this lamp design concept uses that same principle by having two circular plates recreate the interaction between the sun and moon. The top plate houses the light source and shines it downward while the bottom plate reflects it back again and again until only some of that light escapes the small gap between these plates. It creates an interesting play of light that generates a somber atmosphere that is a better fit on a bedside table or side table than a working desk.

While the indirect lighting already makes the concept interesting, it’s the minimalist and modern aesthetic of the lamp that adds to its visual appeal. The form is composed of just a large cylinder that holds up the circular plates, adding no other embellishments or decorations to its pristine design. The lamp subtly and gently attracts your attention before fading into the background, blending with the rest of your room’s decor.

The choice of materials for the lamp also plays a role not just in the lamp’s aesthetics but also in the kind of light it gives off. Stainless steel plates will create somewhat sharper reflections, while wood gives off warmer tones. The simple composition of shapes also offers the opportunity to 3D print the design, which could also use different kinds of materials, including metal or recycled plastic.

The post Mushroom-like lamp uses indirect lighting like the moon to create a softer glow first appeared on Yanko Design.

No Comments
Dec 18

Top 10 Kitchen Appliances & Tools Of 2024

Posted in: Uncategorized

In 2024, we witnessed a whole range of innovative and unique kitchen appliances and tools. These provided innovative solutions that enhance our culinary experiences. If you’re looking to streamline your meal preparation or simplify your cooking process, then these products are a must-have. They are designed to make your time in the kitchen more efficient, enjoyable, and sustainable.

From smart technology that personalizes your cooking to eco-friendly designs that reduce your carbon footprint, the designs we saw this year were truly commendable. We have curated a collection of the top 10 kitchen appliances and tools of 2024! We hope you love them as much as we did.

1. Cheat Sheets

Introducing Cheat Sheets, the game-changing kitchen accessory revolutionizing healthy eating. These ingenious non-stick silicone dividers are designed to simplify meal preparation, making it easier than ever to whip up nutritious dishes without the hassle of juggling multiple pans.

By transforming a standard baking tray into a versatile multi-compartment cooking surface, Cheat Sheets elevates the art of oven cooking to new heights. Imagine being able to prepare various healthy meals simultaneously, with minimal cleanup and maximum flavor. What sets Cheat Sheets apart is their ability to convert a single sheet pan into a dynamic culinary canvas, accommodating a range of portion sizes to suit your needs.

Why is it noteworthy?

The Cheat Sheets can fit six small or three large portions, these dividers are perfect for crafting a diverse array of dishes simultaneously. Whether you’re cooking for a family or planning your meals for the week ahead, Cheat Sheets offers a seamless solution that saves time and effort. This innovative design not only encourages healthier eating habits but also inspires creativity in the kitchen, allowing you to experiment with flavors and textures without the usual constraints.

What we like

  • Lets you prepare multiple dishes in one tray.
  • You can cook different portions according to your requirement

What we dislike

  • Since the sheets are made from silicone, they can get dirty easily.

2. Precision Chef Kitchen Scissors

Say hello to the Precision Chef Kitchen Scissors – these all-black sleek scissors feature a curved serrated blade, letting you cut and prepare your meals with absolutely no mess. You can use the scissors to cut and divide your food, so you have better portion control and can slice up your food pretty swiftly too.

The scissors have been designed to carefully cut meat and different kinds of food as effortlessly as possible. They feature a beautiful black surface that looks powerful and stylish, ensuring they occupy a pristine position in your kitchen or dining table. The black kitchen scissors are excellent for cutting up steaks, veggies, and pizzas.

Click Here to Buy Now: $99

Why is it noteworthy?

The Precision Chef Kitchen Scissors have been specially designed with a curved serrated blade to make meat cutting easier and safer. The black finish won’t fade away due to deterioration, on account of the oxidation coloring. The scissors also feature an ergonomic structure that prevents the blade from touching the surface when laid down.

What we like

  • Features a special curved serrated blade.
  • Makes cutting an easy and efficient step in your cooking process.

What we dislike

  • Only available in black – limited color options.

3. Tokit Omni Cook

Say hello to the TOKIT Omni Cook – the revolutionary all-in-one kitchen appliance that promises to transform your culinary experience. Designed to be the ultimate kitchen assistant, the TOKIT Omni Cook streamlines your meal preparation process, making it faster and more efficient than ever before.

The TOKIT Omni Cook adds some fun and creativity to your cooking routine, turning a mundane meal prep into an engaging and enjoyable activity. It makes cooking delightful and hassle-free and features an automated cooking process. It guides you and helps you cook up some delicious meals.

Why is it noteworthy?

With over 11 built-in culinary modes, it can seamlessly switch between functions, effectively replacing up to 21 different kitchen appliances. Whether you’re sautéing, steaming, or blending, the TOKIT Omni Cook has got you covered, offering unparalleled versatility in a single, compact device.

What we like

  • Features an integrated 7-inch touchscreen display, which lets you customize and tweak your preferences.
  • It won’t take up much space in your kitchen.

What we dislike

  • The multiple culinary modes make the appliance a little tough to use.

4. Mitsubishi Bread Oven

Called the Mitsubishi Bread Oven – this is the ultimate kitchen gadget designed to deliver the perfect toast every time. This charming appliance, reminiscent of a vintage waffle maker with its veneer brown finish, seems like a delightful relic from the ’80s. But don’t let its retro aesthetics fool you!

This toaster is packed with modern technology to ensure your toast is soft, fluffy, and full of flavor. The Bread Oven’s sealed, thermal-insulated structure locks in moisture, preventing your bread from drying out and transforming each slice into a delectable treat. It is equipped with two high-performance plates, capable of reaching temperatures up to 500 degrees Fahrenheit.

Why is it noteworthy?

These ingenious plates envelop the bread, creating a perfect seal that evenly transfers heat and locks in moisture. The result is a slice of toast that is crisp on the outside and irresistibly tender on the inside—far from the dry, lackluster toast produced by conventional toasters.

What we like

  • Features four cooking settings – Toast, Frozen Toast, Topping, and French Toast.
  • Sleek good looks, making it a great fit for your dining table.

What we dislike

  • You can only toast one slice of bread at a time, which can be inconvenient.

5. The Obsidian Black Salad & Serve Tongs

Obsidian Black Salad & Serve Tongs

Called the Obsidian Black Salad & Serve Tongs, these sleek dark tongs are a must-have if you’re someone who enjoys his/her salad. One head looks like a spoon, while the other is shaped like a fork. The dark shade of the tongs creates a perfect contrast against the stunning greens and veggies.

The tongs are compact and classy, making for a wonderful addition to your kitchen and dining table. If you love preparing and serving salads, then these tongs are essential. You don’t need to worry about making a mess or spilling your vegetables and other delicious ingredients.

Click Here to Buy Now: $22.00

Why is it noteworthy?

I aspire to eat clean and usually do so as well. If you’re seeking to eat healthier, then these tongs are a worthy purchase. Not to mention, the tongs are quite sleek and good-looking too. They are also excellent for serving tabbouleh, coleslaw, and other light dishes.

What we like

  • Stronger than conventional tongs.
  • Light, sturdy, and thin.

What we dislike

  • Only available in black – limited color option.

6. KUKU Maker

Called the Kuku Maker, this state-of-the-art coffee machine empowers you to take full control of your coffee-making process, allowing you to tailor each cup to your exact preferences. Whether you want a robust, full-bodied brew or a light, smooth sip, the Kuku Maker offers a range of options to suit your taste. You can experiment with different flavors, choose between thick or light consistencies, and even decide whether you want your coffee hot or cold.

It delivers a consistent taste while allowing you to customize during the brewing process. You can adjust it to a myriad of extraction parameters, including pressure, time, temperature, and grind fineness.

Why is it noteworthy?

The Kuku Maker provides an excellent level of control which lets you fine-tune every aspect of your coffee, ensuring each cup is brewed to perfection. Whether you’re a coffee connoisseur or a casual drinker, the Kuku Maker adapts to your unique preferences, making it a standout choice for those serious about their coffee.

What we like

  • Offers exceptional control and flexibility.
  • Easy-to-clean design.

What we dislike

  • Users will need a learning curve to understand the utilize the various settings effectively.

7. Playful Palm Grater

Meet the Playful Palm Grater – this little tool will be a delightful and efficient addition to your kitchen arsenal. It is designed to make grating vegetables and cheese an enjoyable and smooth task. It can convert a mundane and boring chore into something fun and engaging. It looks like a curled piece of paper, fitting snugly into the palm of your hand.

The Playful Palm Grater boasts a sleek, minimalist form that takes up minimal space, making it an ideal addition to any kitchen or dining setting. Its aesthetic appeal means it’s not just a tool to be hidden away in a drawer; it’s a stylish accessory worthy of display, perfect for impressing guests at dinner parties.

Click Here to Buy Now: $25

Why is it noteworthy?

The Playful Palm Grater features an ergonomic design and playful appearance, combining functionality with flair. Its unique form fits perfectly into your hand, offering enhanced precision and control as you grate. Crafted from a single piece of durable aluminum alloy, it promises long-lasting performance and ease of use.

What we like

  • Available in a variety of fun colors.
  • Serves as an interesting conversation starter.

What we dislike

  • It is small in size, so needs frequent emptying.

8. Suvie

The removable water reservoir.

This innovative kitchen robot is called Suzie, and it is redefining the way we prepare meals at home. This cutting-edge appliance combines a smart Wi-Fi-enabled countertop multi-zone cooker with a built-in refrigerator, seamlessly transforming raw ingredients into a cohesive and high-quality meal.

Whether you’re working with proteins, fresh vegetables, chef-designed sauces, or dry starches, Suvie ensures that each component is cooked to perfection, delivering a delicious and satisfying dining experience every time. It is a great solution for individuals who desire healthy, well-balanced meals but find themselves short on time to prepare them.

Why is it noteworthy?

By integrating optional meal kits, Suvie provides users with the opportunity to enjoy fresh, home-cooked meals without the hassle of extensive prep work. This feature is particularly beneficial for busy professionals or anyone juggling a hectic schedule, as it simplifies the cooking process while maintaining the quality and nutrition of a homemade meal.

What we like

  • Available with a fully customizable Suvie Smart Meals delivery service.
  • The kitchen robot is easy to clean and maintain.

What we dislike

  • Not ideal for bigger families, as it can only prepare meals for 2-4 adults.

9. Explorer Bento Lunch Box

Meet the Explorer Kit by reVessel—a groundbreaking multi-purpose lunchbox and food storage system crafted to free you from the confines of the kitchen and inspire culinary exploration. This innovative bento-style lunchbox is the first of its kind to offer a leak-proof, modular design, tackling some of the most frustrating food storage issues while also being environmentally friendly.

ReVessel’s Explorer Kit brings a new level of convenience and style to maintaining a healthy, sustainable lifestyle. It is a game-changer for those who prioritize versatility and eco-consciousness in their food storage solutions. The Explorer Kit serves as foodware, bakeware, and tableware. This eliminates the need for multiple separate containers and utensils, saving valuable space and simplifying your kitchen routine.

Why is it noteworthy?

The Explorer Kit features a patent-pending leakproof seal made from food-grade silicone, which effectively prevents spills and keeps your food fresh and neatly separated. This ensures that your lunch remains exactly as you intended, without any messy surprises. Its clever modular design allows you to store a variety of foods in one convenient package.

What we like

  • No spills are guaranteed, so you can transport your meals worry-free.
  • Features a modular and versatile design, so you can easily customize meals.

What we dislike

  • Not the best option for those who prefer compact lunchboxes.

10. Sustainable Cutlery Set

Embrace the trend of sustainability with this eco-friendly cutlery set, designed to keep you environmentally conscious wherever your adventures take you. Known as the Sustainable Cutlery Set, these utensils are crafted from Glass Fiber-Reinforced Polymers (GRP), offering a perfect balance of lightweight design, durability, and sturdiness.

Packaged in recyclable materials, this set is as kind to the planet as it is functional. It has exceptional mechanical strength, allowing it to effortlessly handle even the toughest of steaks without compromising the integrity of the knife and fork.

Click Here to Buy Now: $49.00

Why is it noteworthy?

Each component of the set can be conveniently split in half, making it incredibly portable and easy to carry on the go. Additionally, the parts are designed to be screwed and unscrewed, adding to their versatility and ease of use. This set is not only sustainable but also designed for longevity, making it a reliable choice for those who value eco-friendly living.

What we like

  • Portable and easy-to-carry form that makes it excellent for travel.

What we dislike

  • The handles are quite thin, and not well-suited for those with larger hands.

The post Top 10 Kitchen Appliances & Tools Of 2024 first appeared on Yanko Design.

No Comments